Props, UJ's and maybe your TRE's if they have grease nipples on them. Remember to use a lithium based grease
 
get an air grease gun if you have a compresser,
on mine I used a higher spec marine grease
2GREASE%20MARINE%203.JPG
 
I know these questions are very noob - but here goes anyway :eek:

What points on my Landy need greasing and how do I go about it?

Can I do it all with the gun below and using the catridge grease (to save mess)? Do I need anything else (any attachments)? I'm new to this greasing stuff.

Cheers guys.

http://www.toolstation.com/shop/Automotive/Mechanics+Tools/Grease+Gun+400cc/d60/sd180/p29224

Toolstation > Automotive > Mechanics Tools > Lithium Grease

i have that grease gun buy the flexible adapter its much easier
 
I know these questions are very noob - but here goes anyway :eek:

What points on my Landy need greasing and how do I go about it?

Can I do it all with the gun below and using the catridge grease (to save mess)? Do I need anything else (any attachments)? I'm new to this greasing stuff.

Cheers guys.

http://www.toolstation.com/shop/Automotive/Mechanics+Tools/Grease+Gun+400cc/d60/sd180/p29224

Toolstation > Automotive > Mechanics Tools > Lithium Grease
As stated previously, grease everything that has a nipple attached!:D
Just what you have will depend on what has been fitted by previous owners, some aftermarket ball joints have nipples whereas genuine now don't!:confused:

You may be able to do the job with that gun but it will be messy and frustrating, you will make your life loads easier if you get a Wanner or other good make, they are a lifetime investment, I have had my Wanner for thirty years :)
 
Quite a racy site at times this - all this talk of nipples.

I've to have my hands on any landy flanges, but I know my day will come if I'm patient.
 

Similar threads