Nebooaw

New Member
Hi all, i have just got a Defender 90 for my 30th Birthday..

It's a C plate 1985 200TDi i think, check out some of my pics on

alanrussell.co.uk

Does anyone actualy know what model it is???

Will post on another thread with some questions i have on how things work etc...!!!
 
Hi and welcome to the Loony Zone you'll need a GSOH and thick skin on here as we take the **** alot. Your 200tdi defender is in fact a 90 (defenders weren't made till 1990) and it has a 2.5NA (Naturally Aspirated) engine not a TDi.

Looks very nice though.
 
Cool thanks for replying!!! I love it! need to figure out the snorkel as it was partually fitted but needs the hoses connecting (which i have in the back)...

Shouldn't there be a plastic plate to fit at the bottom of the snorkle which wraps down the side???? See the link below...

snorkel

Will start a new thread shortley with all my queries!!!!!

Many thanks,

Alan
 
Cool thanks for replying!!! I love it! need to figure out the snorkel as it was partually fitted but needs the hoses connecting (which i have in the back)...

Shouldn't there be a plastic plate to fit at the bottom of the snorkle which wraps down the side???? See the link below...

snorkel

Will start a new thread shortley with all my queries!!!!!

Many thanks,

Alan

No. NA snorkles usually go thru the heater intake vent on top of the wing and a series vent is fitted to the wing to accommodate the heater hose. Someone has modded that snorklel to remove the need to do that. I must say it's a very neat solution. Not having seen what else they've done I'm assuming you'll need to remove the wheel arch liner and fit a length of flexible hose to the snorkel, and feed it between the inner & outer wings. Then drill thru the inner wing to meet up with the airfilter housing.
 
Cool!!! I have all the bits so i will have a go on friday!!!! Thanks for your advise..

How do i set up my signature and photo on my posts?

So i dont look stupid what do i state my defender as?

1985 Defender 90 2.5NA?

Cheers!

Al
 
Cool!!! I have all the bits so i will have a go on friday!!!! Thanks for your advise..

How do i set up my signature and photo on my posts?

So i dont look stupid what do i state my defender as?

1985 Defender 90 2.5NA?

Cheers!

Al

No probs good luck. to set up signature click "user CP" it's all in there then. Ya landy is a 1985 90 2.5NA.
 
Hi all, i have just got a Defender 90 for my 30th Birthday..

It's a C plate 1985 200TDi i think, check out some of my pics on

alanrussell.co.uk

Does anyone actualy know what model it is???

Will post on another thread with some questions i have on how things work etc...!!!



:welcome: congratulations!
 
Yay!! Congrats on your new arrival!!

Just to save you any confuzzlement; your Landy is a 'Ninety', in words - as opposed to a '90' in figures :D

:welcome2: to the asylum, pull up a padded cell and make yourself at 'ome :D
 
Crickey, that's my old one. It was me your wife got it from.

I put the snorkel on, well half on, so let me know if you need to know anything about how to finish it off.

And by the way, he's called Hector ;)

I better get my avatar changed
 
Hi Big Red!!! I love this defender!!! I managed to route the hose for the snorkle, behind the heater and up to the air intake - got it all siliconned and rivited on!!! What can you tell me about this vehicle, any pics of it in action etc...!!! I have orderd an a-bar and some spots so will get this fitted later this week, also had the range rover wheels primered and sprayed black along with the front bumper - will post some updated pics soon!!! Having some difficulty in getting some help installing some work lights as per another thread!!!

Many thanks,

Alan
 
I did have an Abar on him in the past, as you'll see in the pics.
We'd only had him since last year, in that time we've been laning once, and to an offroad centre once. Although we've never done anything extreme, hence why the snorkel wasn't connected, it was only for show!!
We bought him from an elderly chap who had him for the last 5 years, he'd done any jobs that had come up straight away. He was gutted to sell him, but he could barely walk anymore and was struggling to be able to get in.

Here's a couple of pics, and a link to a couple of vids.

DSCF0686.jpg


f51cc2bf.jpg


DSCF0594.jpg


[ame="http://uk.youtube.com/watch?v=ARsqexEXWdk"]YouTube - Northern Monkey in the Peaks[/ame]

[ame="http://www.youtube.com/watch?v=yr0SWl6YFBY"]YouTube - Northern-monkey-offroad @ Kirton Off Road Centre (KORC)[/ame]
 
Last edited:
On the off chance somone may know off their head:

I've been after the heater to front nearside (Series 3 intake) pipeing anyone know the part numbers? I got the wing vent but cant seem to find the tight 90 degree bend to get along the inside of the wing to heater intake. Jai
 

Similar threads