bluedog333 · Feb 3, 2015

trax said:
that roof on the green doesn't look like a 110 either. they had ribbed roofs; later had smooth.

also it has a wing vent and wing indicators, uk 110's don't. not sure about exports.

also, rear wiper and wash and the rear lamp with the spacer.

take more pics of the green interior and engine bay.

atm, it smells like a 200tdi on the wrong plate.. still looks great

My '87 One Ten's got a vent too. I think County's did. Same with the rear wiper/wash!

bluedog333 · Feb 3, 2015

Although I'm also starting to think she's a genuine 200TDi. Ipso facto not an '89.

Barbados · Feb 4, 2015

VIN is SALLDHMB7FA

I left out the remaining numbers, but this should say what it is guys.

I think its an 89 with a 200tdi engine swap.

timc1967 · Feb 4, 2015

trax said:
that roof on the green doesn't look like a 110 either. they had ribbed roofs; later had smooth

My 89 has a smooth roof. I guess it could have been charged but it came with history that mentioned a lot if things but not the roof.

bluedog333 · Feb 4, 2015

That vin does suggest an 89 doesn't it!? Is the interior light door operated or do you need to use the rocker switch by your right knee?

Barbados · Feb 4, 2015

Pic of interior, old decals and then a pic of the new decals I made with my vinyl cutter. I am 100% sure its an 89 but not sure of the 200tdi in there, maybe the 19j was replaced with a 200tdi.

When I bought it I wanted either the 200 0r 300tdi so was not concerned if it had a 19j until now that you guys pointed it out.

Good bit is, the 200 pulls strong with a stock set up, I was very surprised. Braking was impressive too for such a heavy vehicle.

Interior lights are turned on by toggle switch though its broken, no door contacts like my 97.

bluedog333 · Feb 4, 2015

I think you're right about it being an 89. It's had a couple of mods: engine ( obviously ); decals ( should be "Land Rover 110" on grille and Land Rover Turbo on the rear ). Contrary to my earlier post about the roof ribs, these were changed to a smooth roof in 89 so that tallies!
Don't be offended, but personally I don't like the new decals on the rear! Lovely Landy though!

Barbados · Feb 4, 2015

bluedog333 said:
I think you're right about it being an 89. It's had a couple of mods: engine ( obviously ); decals ( should be "Land Rover 110" on grille and Land Rover Turbo on the rear ). Contrary to my earlier post about the roof ribs, these were changed to a smooth roof in 89 so that tallies!
Don't be offended, but personally I don't like the new decals on the rear! Lovely Landy though!

The local Landy guys think that the engine is original, one is a mechanic too and said the exported CSW came to the islands with 200's in them. I will try to get the history on this Landy from the MOT office here.

Not offended easily at all Blue and do like comments and ideas from others. I did the decals to cover the old ones and the old paint. The Landy was repainted by the previous owner and the lazy azz body work guy just masked the old decals and painted around them leaving the faded paint visible.

The old decals wont come off either, I used a heat gun and they wont budge. If it was sanded off when the Landy was being painted it would have been awesome but that was too hard for them to think of and do.

harry2012 · Feb 4, 2015

Not possible the 200tdi was launched with the new 'Defender' model late 1990. Unless yours was something like a very early press car?

Also I believe the steering wheel changed with the Defender launch too.

Barbados · Feb 4, 2015

harry2012 said:
Not possible the 200tdi was launched with the new 'Defender' model late 1990. Unless yours was something like a very early press car?

Also I believe the steering wheel changed with the Defender launch too.

This Landy was owned by the local government and then by a very famous and extremely wealthy business man who actually bailed out the sugar industry from collapsing a while ago. I am really pumped to get more history of the vehicle.

Jam1 · Feb 4, 2015

harry2012 said:
Also I believe the steering wheel changed with the Defender launch too.

The early 200 fenders still kept that wheel

bluedog333 · Feb 4, 2015

Always nice to have a bit of history. Definitely not the original engine though, might be an original Defender 200 TDi ( as opposed to a Disco 200 ). Discos ( with 200 TDis ) were introduced in 1989, but Defenders didn't go into production until July 1990.

bluedog333 · Feb 4, 2015

Upholstery looks like Moorland grey, which was introduced on the Defender ( I.e. 200tdi ). God this Landy's confused!

trax · Feb 4, 2015

bluedog333 said:
My '87 One Ten's got a vent too. I think County's did. Same with the rear wiper/wash!

wow, fancy for eighties tech

trax · Feb 4, 2015

my 86 binnacle cover thingy doesn't have vents and the door cards are some flat 80's thing.. but new doors are common.

the dash lights might be different in mine too... or yours are just really clean compared to mine

vin doesn't mean much

it looks nice! only reason i brought it up was your friend importing it into the us. would hate for it to be crushed

your steering wheel cover looks legit

Barbados · Feb 4, 2015

trax said:
my 86 binnacle cover thingy doesn't have vents and the door cards are some flat 80's thing.. but new doors are common.

the dash lights might be different in mine too... or yours are just really clean compared to mine

vin doesn't mean much

it looks nice! only reason i brought it up was your friend importing it into the us. would hate for it to be crushed

your steering wheel cover looks legit

We know that crushed Landy video clip only too well.

My friend is a diplomat too but from the US. I would tell him to send all the Landy's documentation first for them to look at and get all that they need for verification before it leaves. We could send pics if needs be too, so hopefully get a green light before shipping.

I would feel bad for him though I shelled out a ton of cash for the 97 one so he can have the 89.

Steering wheel is the first thing that would have had to go, but since he wanted it I was leaving everything stock until it got there.

Barbados · Dec 18, 2018

Well mates, the time flies by so fast, Jan 20th 2019 will make it 4 years since I bought this Landy, drove it to my garage to be rebuilt. After spending tens of thousands here along of importing parts and accessories from the UK, I have done a bit since then, this includes tons of accessories, wheels, electronics etc. I should have been updating this thread all along.

I have rebuilt the engine entirely, bored it it to 40 thou, ported and polished the head along with other modifications.

.

My piston protrusion measurement small.jpg

Barbados · Dec 18, 2018

Head and intake ported and polished

.

flat · Dec 18, 2018

What happened with the green one? Did you work out what it was and did it go to the US?

Barbados · Dec 18, 2018

I decided to use a MB variable vein turbo. This meant that I had to machine an adapter to convert from a T2 to the the GT2256V type. This took quite a bit of time and test fitting to get it right, ie., weeks.
.
.

Well-Known Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Attachments

Well-Known Member

Active Member

Active Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

.

.

Active Member

Active Member

Active Member

Well-Known Member

Active Member

Similar threads