simba1

Member

• May 23, 2020

• #1

Hi can anyone say is there an easy way of checking these are all working without removing them ie with a multimeter. nothing in haynes manual.
Regarsd john.

 

L

lynall

Well-Known Member

Full Member

• May 23, 2020

• #2

Youtube

 

R

Rodeo Joe

Well-Known Member

• May 23, 2020

• #3

Its no hassle to take them out and wire them up to a battery. If they glow red they're ok.
No substitute for taking them out to check the overall condition.

 

simba1

Member

• May 28, 2020

• #4

hi Joe do you need new seal washers if you remove them?

 

R

Rodeo Joe

Well-Known Member

• May 28, 2020

• #5

Section 86-17 in the work shop book will tell you how to check the plugs, as far as I know there isn't a washer on them.
https://onedrive.live.com/?authkey=!AMrvOm7c4l3jJkg&cid=4BC2D89C85C7C171&id=4BC2D89C85C7C171!27769&parId=4BC2D89C85C7C171!27763&o=OneUp
This link was put up by someone recently, do yourself a favour and download it just in case its taken down.

 

Last edited: May 28, 2020