Beast o Bodmin
Banned
burn it
Beast o Bodmin
Banned
weld a nut to it.
Pikey
Dummy Ejection Facilitator..
If it's got the RRC locking nuts. The ones with the holes in the flange. as opposed to the discovery ones with the grooves on the side. Then hammer a 20mm socket (not a 6sided one) and they'll come off no problem at all. getting the socket off to do the next one is a bit of a pain though 
I've done this 3 times now when fitting me mudtyres before going laning. If it's got the grooves on then cut a 4mm drill bit down and locate it in a groove before hammering the socket on.
I've done this 3 times now when fitting me mudtyres before going laning. If it's got the grooves on then cut a 4mm drill bit down and locate it in a groove before hammering the socket on.
MartinK
New Member
Laser make a locking wheelnut removal tool:
Laser Tools | 3748 | Alloy Wheel Nut & Locking Removal Kit 8p
However as others say, there are only a few types (they have a letter on them) and you can order them for a few £. My local independant keeps a bag of them for removing wheels..
Laser Tools | 3748 | Alloy Wheel Nut & Locking Removal Kit 8p
However as others say, there are only a few types (they have a letter on them) and you can order them for a few £. My local independant keeps a bag of them for removing wheels..
LouiseLandRover
Member
With mine I just carefully got a angle grinder and cut a slit across them all then an old wheel nut and welded flat peice of metal to it. It was like a massive Flat headed screw driver! Was fiddly though!
u can get wheel nut removal tools (from Halfrauds, etc) - but £6 for a key is the best offer yu will get.
