K

Karls

Active Member

• Dec 10, 2017

• #21

zeaphod said:

Hi. I have similar doors - it looks like you have similar locks, and new escutchions (the bit around the kethole) Ive been lookng for one for ages, where did you get it?

Click to expand...

Do you mean the escutchions? I got them from SP4x4.

 

zeaphod

Well-Known Member

• Dec 10, 2017

• #22

Yes, and thanks!

 

mick the builder

Well-Known Member

• Dec 11, 2017

• #23

Hi Karl. Have you tried the old doors in the opening just to set your mind at rest that the tub is in the same position it was in before you removed it. I haven't tried my doors yet but remember I had trouble fitting tub to crossmember even with a jig like yours.

 

K

Karls

Active Member

• Dec 11, 2017

• #24

Hi Mick, thanks for the suggestion. Trouble is the old doors were absolutely shot to...pieces. The bottoms of them had gone as had part of the legs of the frame. I’ll take a look back at some earlier photos though, just to see how they looked. Thanks!

 

frog hopper

Well-Known Member

• Dec 11, 2017

• #25

Can you (with a helping hand ) slacken off the hinge screws and lift the door so everything lines up on the waist-line and retighten?