micknkatenki

Active Member

• Dec 21, 2017

• #1

Hi,
Will be taking engine, gearbox and transfer box out soon (all in one hopefully) while they are out I will replace the clutch/fork/spigot etc etc. couple of jobs and oil leaks to look at on the engine but thought it might be worth checking the gearbox/transfer box again while they are out, what would be the things to check or look for, any ideas ?? both seem to be all ok, drives ok, changes gear etc all ok.

Or can someone recommend somewhere or someone that I could take them to ??

Thanks...

 

Kwakerman

Well-Known Member

• Dec 21, 2017

• #2

If both boxes are leak free and working and all splines look good just refit them and change the oils.

 

micknkatenki

Active Member

• Dec 21, 2017

• #3

Kwakerman said:

If both boxes are leak free and working and all splines look good just refit them and change the oils.

Click to expand...

Nothing precautionary ??? What about any seals ?

Thanks

 

jamesmartin

Well-Known Member

• Dec 21, 2017

• #4

micknkatenki said:

Nothing precautionary ??? What about any seals ?

Thanks

Click to expand...

if they arent leaking dont change them, except out seals on t/box

 

micknkatenki

Active Member

• Dec 21, 2017

• #5

jamesmartin said:

if they arent leaking dont change them, except out seals on t/box

Click to expand...

Hi James, thanks, output as in both prop flange seals ?

 

jamesmartin

Well-Known Member

• Dec 21, 2017

• #6

micknkatenki said:

Hi James, thanks, output as in both prop flange seals ?

Click to expand...

yes but if they are dry dont bother,

 

micknkatenki

Active Member

• Dec 21, 2017

• #7

Thanks James, Kwakerman that's possibly/hopefully saved me a bit of time and expense.

It was just a thought while out to save having to remove them at a later date.

Thanks

 

nesponge

Active Member

• Dec 22, 2017

• #8

Might be an idea to grease your transfer box linkages while you have good access.

 

micknkatenki

Active Member

• Dec 22, 2017

• #9

nesponge said:

Might be an idea to grease your transfer box linkages while you have good access.

Click to expand...

Yes good idea....... and I deffinatly have access

 

jamesmartin

Well-Known Member

• Dec 22, 2017

• #10

nesponge said:

Might be an idea to grease your transfer box linkages while you have good access.

Click to expand...

now that is a good idea