end float for 1st 2nd and 3rd gears is vital needs to be at least 2 thou but not greater than 8

end float for 1st 2nd and 3rd gears is vital needs to be at least 2 thou but not greater than 8
How do you reduce the endfloat on 1st gear? Mine is around 10 thou. Is the wear normally on the mainshaft gear 591362 where it runs against the grooved thrust washer 576735? And ok to renew on its own? (you don't have to renew in pairs - mainshaft/layshaft?) thanks
 
Last edited:

Similar threads