REEVSY

Member
Has anybody got a contact That can supply a R280 gearbox turret, spring and roll pin. Mine is in a poor state.
 
It would seem Ashcrofts Fave the turret but not the spring and roll pin but i will ring on Mon and see what they say? Thanks!
It would seem Ashcrofts Have the turret but not the spring and roll pin but i will ring on Mon and see what they say? Thanks!
A978EE9F-6764-446C-8BD6-F25C382867C6.jpeg


this is the complete unit
 
They should be available from any Land Rover parts supplier if you look up the part numbers.
Thanks for this ....,as I don’t have a parts book I wonder if anybody has the parts No. I’m a bit old to start collecting parts books now in my late seventies.
 
That’s great, I was in the process of fitting a Slickshift however the turret was very worn in the spring housing Area so in for a penny in for a pound, it made very little difference to the stick movement when adjusting the bios spring, the ware is so bad.
 
The bias spring is only there to position the stick (at rest) to be aligned with the 3rd/4th gear gate.
If your turret is worn so the stick is 'sloppy' when in gear, fitting a new one will help cure that. Bias springs and pins aren't expensive but I'd be surprised that the originals are worn ....

Got any pictures ?
 
The bias spring is only there to position the stick (at rest) to be aligned with the 3rd/4th gear gate.
If your turret is worn so the stick is 'sloppy' when in gear, fitting a new one will help cure that. Bias springs and pins aren't expensive but I'd be surprised that the originals are worn ....

Got any pictures ?
Thanks I’m getting the slick stick kit on Mon. It’s only a quick job so will see what it’s like When fitted then decide if I should change the turret.
 

Similar threads