jamesmartin
Well-Known Member
plug on underside of pump plate ,idle 100 psi or 7 bar ,2000 revs 150 psi or 10 bar
jamesmartin
Well-Known Member
10 cm from level plug/pipe ,you will loose some but wont drain the box as goes to out let of pump
Hello James I am confused as to which plug you are talking about what do you call the pump plate are you talking about on the outside of the gearbox as I can only find 4 plugs on the bottom of the gearbox 2-hexagon plugs and 2-allen key plugs close to the fill pipe and I have taken them all out one at a time and they have funny size threads not BSP as on the guages can you please tell me if it is one of these that you are talking about
jamesmartin
Well-Known Member
yes they are all screwed into pump plate ,you can get an adaptor lr tool lst502-1 i have a sykes engine oil pressure kit and adapter out of there fits box plus sykes o-300 psi auto pressure guage
jamesmartin
Well-Known Member
the one 1o cm or 4 inchs from level plug or tube ,adapter would be needed if yours doesnt fit i use one from other test kit as said or make one
