Hi I have a January 2014 Disco 4 HSE with 140k miles.
Took it to get the tracking sorted yesterday and put it in neutral so the the car could roll it back and forth to set the alignment.
However it was then stuck and would not move. The gear selector is raised and will not turn with N flashing on the dash.
Battery disconnected and reset but selector still stuck in neutral. Red lever under cup holders raised to enable the car to be recovered.
Any ideas how to sort the problem would be gratefully appreciated.
Ian

Hi.. see my post, our’s was slightly different as it was stuck in reverse.
We changed battery , swapped brake switch and after a little YouTube research found a common issue.
The wife Changed out the rotary gear selector module whilst I was at work ( and following detailed instructions ) and boom worked first time. No need for expensive towing and garage repairs .
The unit was about £375 plus vat and delivered next day . Hope this helps a little

Chrislowns said:

Hi.. see my post, our’s was slightly different as it was stuck in reverse.
We changed battery , swapped brake switch and after a little YouTube research found a common issue.
The wife Changed out the rotary gear selector module whilst I was at work ( and following detailed instructions ) and boom worked first time. No need for expensive towing and garage repairs .
The unit was about £375 plus vat and delivered next day . Hope this helps a little

Click to expand...

He asked, over a year ago.