That's, sadly, normal. It's rung, from abuse. Not welded at all. Buy a new one, remove with a visegrips, and replace.
 
You need to get it out. Easing oil like RP90 and a good soak may do it along with some Irwin bolt grippers [ well worth having for other jobs as well ]
Other way some heat from a blowlamp [ not to much case is alloy] and a Stillson wrench.
 
Part 41 on this, series 2a parts book, I think.
Screenshot_2021-09-29-20-08-39-500_com.google.android.apps.docs.jpg
Screenshot_2021-09-29-20-07-51-942_com.google.android.apps.docs.jpg
 
I would not buy a new bung yet, wait until you have removed the old one, as later ones are somehting like half inch bs thread, earlier ones are much smaller Iirc eighth bs thread, the eighth bs thread use a really small square drive, something like 9mm square maybe smaller, they are always overtightened!
 
Thanks for link wildefalcon
lynall said:
I would not buy a new bung yet, wait until you have removed the old one, as later ones are somehting like half inch bs thread, earlier ones are much smaller Iirc eighth bs thread, the eighth bs thread use a really small square drive, something like 9mm square maybe smaller, they are always overtightened!
Click to expand...
I have another knackered box but the one in that does look a lot bigger, will get this out first then try it.
 
The square in the end of a half inch socket extension fits those plugs, adjustable spanner on other end.
 
You must log in or register to reply here.

Similar threads

D
Lost high range gear in transfer box??i
Replies
11
Views
917
steve2286w
steve2286w
Lej
LT230 + ratios
Replies
19
Views
271
tottot
tottot
T
Auto Box Wont stay in Gear
Replies
11
Views
475
Graculus
Graculus
usna87
LT230 grinding noise?
Replies
6
Views
247
Maat
Maat
N
Noise from gearbox/transfer box
Replies
14
Views
2K
NeilsWheels
N