JoeBodge

JoeBodge

Member
Good afternoon,

I know this topic has been covered a few times, but I’m after a definitive answer from people who have used these companies. I’m not after a debate on whether a galv bulkhead is the right choice, or that it’s too expensive. I’m just after opinions of the company’s workmanship.

I’m wanting my knackered defender bulkhead repairing and galvanising. I’m wanting the original bulkhead repairing, so not an exchange unit.

I’ve been in contact with Ashtree and Classic bulkheads. Both of which are near enough the same price.

Has anyone used either of these for this service? And what are your opinions of their work?

I’ve had a search about and Ashtree has a lot of mixed reviews, some excellent, some bad, i.e. they returned the bulkhead and went elsewhere, welds were not ground back, patchwork panels used on the footwells etc..

I cannot find any reviews about classic bulkheads in Birmingham, so has anyone on here used them?

Thanks for your advice. It’s a lot of money to spend, and I want it doing right. Thanks
 
sorry as i know not much of what your looking for, but would this question be better suited in the series or fender sections ??
 
I've got an Ashtree bulkhead. Pleased with it overall. Mine arrived within 3 weeks of ordering. I also bought a galv front panel and cappings off them - all fine. I can see a weld patch on the drivers side top bulkhead corner but apparently galv sticks more to welds even if they are welds which were originally ground back. I could have rubbed back the galv to flat it or skim with some filler to lessen the effect but wasn't really too fussed as it's not a museum resto. Didn't want to compromise the galv. They also fit nice ribbed panel footwells like original.
Another one to consider for Bulkheads is Andover Landrover. Not used them but heard good things
 
Land Raver said:
I've got an Ashtree bulkhead. Pleased with it overall. Mine arrived within 3 weeks of ordering. I also bought a galv front panel and cappings off them - all fine. I can see a weld patch on the drivers side top bulkhead corner but apparently galv sticks more to welds even if they are welds which were originally ground back. I could have rubbed back the galv to flat it or skim with some filler to lessen the effect but wasn't really too fussed as it's not a museum resto. Didn't want to compromise the galv. They also fit nice ribbed panel footwells like original.
Another one to consider for Bulkheads is Andover Landrover. Not used them but heard good things
Click to expand...

Your right about the galv showing up the welds, it sits a lot thicker on them but if the weld has been flush finished before hand its safe to sand the galv down flush again before painting.
 
ghound said:
Your right about the galv showing up the welds, it sits a lot thicker on them but if the weld has been flush finished before hand its safe to sand the galv down flush again before painting.
Click to expand...

Yes, that's the thing though....how can you be sure they have been fully ground back before galvernising? I didn't want to risk it and worked on the basis that thicker galv can only be a good thing.

I think many criticise being able to see the weld lines after galvanising, not realising that this is mostly unavoidable but correctable.
 
Last edited:
As a matter of interest how much were you quoted? Am saving for new/galv/fully repaired for my series 2 but dare not get on phone just in case I spend money I ain't got lol
 
Glad you asked these questions as im in the same position
there is a guy on ebay that is doing them
but he is a pain to get hold of
 
Thanks For your replies

Ashtree quote £725 +VAT on an exchange basis
Classic Bulkheads quote £900

Just been in contact with another company - Moss Side land rovers - hes a really nice chap. Im going to use him, hes work looks really good, and he comes very highly recommended, and not nearly as highly priced! sorted.

Thanks for your help
 
JoeBodge said:
Thanks For your replies

Ashtree quote £725 +VAT on an exchange basis
Classic Bulkheads quote £900

Just been in contact with another company - Moss Side land rovers - hes a really nice chap. Im going to use him, hes work looks really good, and he comes very highly recommended, and not nearly as highly priced! sorted.

Thanks for your help
Click to expand...

Glad your sorted mate, can you forward the details and maybe some pics
 
I've had various items galvanised over the years, but never a bulkhead. I used to use Highland Galvanisers and they quote £7 to £10 per m2. If i remember correctly they had a minimum charge of £90. Taking into account welding repairs and prep, I reckon this could be done a lot cheaper than the prices quoted??? Has anyone ever went down this road? Issues i could see would be possible warping due to heat involved in the process. Some kind of bracing might be required welding in prior to hot dipping ??
 
JoeBodge said:
Thanks For your replies

Ashtree quote £725 +VAT on an exchange basis
Classic Bulkheads quote £900

Just been in contact with another company - Moss Side land rovers - hes a really nice chap. Im going to use him, hes work looks really good, and he comes very highly recommended, and not nearly as highly priced! sorted.

Thanks for your help
Click to expand...

Thanks Joe, nice speaking to you the other day and more than happy to take on the resto of your bulkhead.
Once It arrives you can keep progress of it at my facebook page, 'Mosside Rovers'
Cheers
Robert
 
ghound said:
Thanks Joe, nice speaking to you the other day and more than happy to take on the resto of your bulkhead.
Once It arrives you can keep progress of it at my facebook page, 'Mosside Rovers'
Cheers
Robert
Click to expand...

Well that answered my questions Robert, will take a look at you Facebook page and contact you through there if I have any questions.
 
You must log in or register to reply here.

Similar threads

R
Galv Bulkhead
Replies
3
Views
278
dag019
dag019
chrisstdt
Galvanised bulkhead
Replies
18
Views
2K
shaynecm
S
J
Freelander 2 SD4 M/S
Replies
2
Views
242
Nodge68
Nodge68
archwayanimal
Fault code 0753 Solenoid 1 valve?
Replies
8
Views
539
archwayanimal
archwayanimal
Andrewoldold
M&S lights no crank / potentially immobilised?
Replies
1
Views
160
sierrafery
sierrafery