J

jamesm

New Member
Hi

I have just started getting a funny and scary noise.

Driving along with the accelerator down a little is fine but as soon as I take my foot off and it starts engine braking I get a terrible grinding noise.

Any ideas?

Thanks
James
 
Thanks Sean, have booked it in with a Land Rover specialist garage - will let you know what it was!

Not in to this DIY stuff :D

Cheers
James
 
You were correct. The rear UJ on the prop shaft was buggered - they fitted a new one in an hour and I was back on the road :)

As for DIY - going to try and fit some new front discs this weekend...hmmm I see a new thread coming on :D

....and yes the house is in a right state :D

Cheers
James
 
Hey Sean,

As far as I know they just replaced the rear UJ, they charged £78 all together £40 for labour and £38 for part.

Hope that helps you,
Cheers,
James
 
Sean said:
£38 for a part that normally costs a tenner isnt bad i suppose :(
Click to expand...
£6.50 for Hardys, that's a product markup of 800%! Coulda got a whole new propshaft and fitted it, with the labour it would have been much cheaper and better!
 
odenne said:
£6.50 for Hardys, that's a product markup of 800%! Coulda got a whole new propshaft and fitted it, with the labour it would have been much cheaper and better!
Click to expand...

oi dunt be upsetting the poor chap he's just happy cos he didnt have to sell his doris to get it his landy back
 
Sorry James, dint mean to make you feel bad! Get some tools. The whole propshaft is only about £60 and it just bolts off and on in about 5 mins and that replaces the ujs both ends and the shaft (in case the sliding splines are worn) - or just replace the UJs for 6.50 a pop, which is slightly more technical but still relatively easy.

Did you have mecanno as a kid? It's like that only easier (and bigger and generally rustier) If something breaks, unbolt it, whack it a few times with a big hammer and bolt it back on.
 
Odenne,

Many thanks, yea mechano and lego were favourites of mine! :)

Will get some tools over the next few weeks and start with some minor stuff and work my way up. Just got to wait for my Haynes manual and I will be sorted.

Thanks again
Cheers
James
 
jamesm said:
Odenne,
Just got to wait for my Haynes manual and I will be sorted.

Thanks again
Cheers
James
Click to expand...

I have one, came with my 110. Fairly useful, but i would suggest asking on here if you aren't sure! As i am sure you are aware, the haynes manuals assume the car is new and not at all rusted at all anywhere, so reality can often be different.
 
Doh, James, am most disappointed - why are you selling up? Hopefully in order to get an even better defender?
 
jamesm said:
Just got to wait for my Haynes manual and I will be sorted.
Click to expand...

oh dear ... that'll be when yer troubles really start ....

you might be better off downloading the relivent manuals from one of those third world download sites
 
Sean said:
oh dear ... that'll be when yer troubles really start ....

you might be better off downloading the relivent manuals from one of those third world download sites
Click to expand...

Does anyone have some quick to find links to these? I have a haynes that came with my first landy, and would like something a bit more, err, practical?
 
You must log in or register to reply here.

Similar threads

D
What IS this noise ?
Replies
12
Views
834
dogdog1
D
C
Can anyone help?L322 td6 noise when releasing accelerator.
Replies
2
Views
339
cpdriley
C
W
FL2 2009 Engine starts then slowly stops unless
Replies
3
Views
266
Wiper2001
W
O
Defender - 2002 - engine noise
Replies
16
Views
1K
OrlaP
O
ryan_1993
Defender 300 Tdi weird noises under boost
Replies
9
Views
600
ryan_1993
ryan_1993