AlbertDefender90

AlbertDefender90

Active Member
Hi all,

I'm looking at fitting a full width intercooler to my 200 before I put the body back on. What are my best options keeping price and modifications to a minimum? I've seen the allard and allisport ones but they are a little out of my price range

Thanks

Albert
 
You can fit a standard td5 one quite easily if you centre the radiator in the mount. Cheap enough to pick up and just a bit of plumbing.
 
Being new to all this what is the advantage of having a full width or enhanced intercooler and is it a fairly easy job to do on a 200tdi? Cheers!
 
Better cooling and airflow with a bigger intercooler I.e more power, as for how easy that's part of what I'm asking with different options
 
jonnygurkha said:
Being new to all this what is the advantage of having a full width or enhanced intercooler and is it a fairly easy job to do on a 200tdi? Cheers!
Click to expand...

A bigger intercooler on it's own won't really net much. The reason you need it is, as you compress air (via the turbo), you get heat as a by-product. But higher intake air temps aren't good for power. So you want to cool the air after it's compressed.

Early turbo engines didn't bother with an intercooler at all, but usually ran low boost. Such as the 2.5TD. The Tdi being intercooled is a good thing, but the stock intercooler is quite small.

If you want to tweak the injector pump for more fuel and tweak the turbo for more boost, then a bigger intercooler will allow a more aggressive tune and get the intake temps lower.
 
Crowman,

That set up looks really good. Guessing you got that IC on ebay, I used to bay many of them for a supplier while I had my performance in Canada.

They are well built and fairly cheap, most not costing over USD 150. Never had any leaks or cracking. Hope you are running a puller fan, the ones I use are Spal 16" extracting low profile with straight blades.

IC plumbing looks good too.
 
Does anyone know the overall width of an rs500 intercooler minus the brackets? I'd like to try and fit one in the rad housing like crowman but I don't know how wide it is
 
There are some good intercooler supplies on ebay. Simply measure the space in the landy and then go shopping. All the ebay IC suppliers lists the various sizes online.

You can get the IC and even a different rad like the one illustrated on this thread, that setup is great inclusive of the electric fan.

Since I am now in the tropics, I will go with a lower temp thermostat, a thermo switch rated with manual over ride for the fan and required warning lights.

I am about to go grab all my gauges which have programmable warning lights and stored peak values.
 
The one I fitted (above pics) is the very biggest you can fit in the front IMV.

It made no discernible difference to performance btw, neither faster or slower.
 
AlbertDefender90 said:
How much modding did that setup take to fit? Also do you have any links to where you got the intercooler from? [emoji4]

Thanks

Albert
Click to expand...

Modding was essentially the electric fan and then hang the water rad off the old rad frame.

The pictures pretty much tell the tale. The IC was off the bay for around £90 IIRC - it was 6-7 years ago.

The silicone hoses added at least another £60 and the jubilee clips etc probably another £25 so the IC part came to sub £200 and was a 'nice' job to complete.

I then moved the wastegate feed to the inlet manifold, water injected it, fitted a boost valve and turned the pump up a few notches.

Goes well now. MPG 27 on 95% veg oil!
 
crowmann said:
Modding was essentially the electric fan and then hang the water rad off the old rad frame.



The pictures pretty much tell the tale. The IC was off the bay for around £90 IIRC - it was 6-7 years ago.



The silicone hoses added at least another £60 and the jubilee clips etc probably another £25 so the IC part came to sub £200 and was a 'nice' job to complete.



I then moved the wastegate feed to the inlet manifold, water injected it, fitted a boost valve and turned the pump up a few notches.



Goes well now. MPG 27 on 95% veg oil!
Click to expand...


Thanks, what are the dimensions of the core? I could do with knowing to make sure it fits cos most of the eBay ones don't mention external dimensions. Also it would be nice to do a volume comparison with others I've looked at.
 
You must log in or register to reply here.

Similar threads

Mr K
Freelander 1 Allisport Intercooler Fitment question TD4 Facelift
Replies
1
Views
984
Mr K
Mr K
Seph98
Turbo Hoses with oil
Replies
7
Views
720
miktdish
miktdish
Aflyingduckling
Hifly Tyres 7.5r16 ?
Replies
4
Views
319
300bhp/ton
300bhp/ton
ryan_1993
Looking at Intercooler Options (nothing too crazy)
Replies
17
Views
3K
dag019
dag019
payydg
Updated intercooler - benefit without tweaking pump?
Replies
13
Views
1K
miktdish
miktdish