S

steve-o

Active Member

• May 24, 2014

• #1

Is removing the whole dash a fairly easy job?

Want to check/paint in thermal bulkhead but don't want to mess anything up!

300tdi. 1996.

 

SteNova

Well-Known Member

• May 24, 2014

• #2

Remembering where all the differnt sized screws go is the hardest bit

 

matchmetisse

New Member

• May 24, 2014

• #3

Yeah really easy!

 

Caberfeidh

New Member

• May 24, 2014

• #4

It might be a good idea to get new screws. Mine had gone rusty.

http://www.amazon.co.uk/gp/product/B00JU8GXE0/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

 

Al2O3

Well-Known Member

Full Member

• May 24, 2014

• #5

I labelled everything up with masking tape and a numbering system. Took lots of pictures too!

 

Attachments

• 
  IMG_4975.JPG

  196.9 KB · Views: 201
• 
  IMG_4976.JPG

  241.4 KB · Views: 229

matchmetisse

New Member

• May 24, 2014

• #6

I used stainless self tappers when i put my dash back in but used new plastic fitting from lr series.

 

greyhair

Well-Known Member

• May 27, 2014

• #7

Good idea to check behind the dash, mine was a real mess and has since been stripped ready for a rebuild
Take you time and take pics and label everything

 

Attachments

• 
  P3230279.JPG

  211.6 KB · Views: 189
• 
  P3230309.JPG

  257.5 KB · Views: 176