D

Davemj

Member

• Aug 30, 2015

• #1

Hi my disco 2 td5 2003 facelift model has the left front wheel closer to the front of the wheel arch almost touching and the right one in the middle were it should be. And ideas. Also I have removed rear air bags and removed the compressor fuse in the engine bay. Cheers

 

sierrafery

Well-Known Member

• Aug 30, 2015

• #2

IMO you should take it to a wheel alignment first... they will be able to tell you if there's a missalignment of the axle if that's the issue(let's hope not)

 

D

Davemj

Member

• Aug 30, 2015

• #3

I had that done after it had new ball joints upper and lower put on.

 

stannswhite

Well-Known Member

• Aug 31, 2015

• #4

if you had the new ball joints done recently,it would
be a good idea to take it back to who fitted them,or
take it to a garage to check,it doesnt sound good
regarding wheel alignment or safety.
regards stan.