P

philpridd

New Member

• Nov 16, 2010

• #1

I know that the service spec. changed from oil to grease,but which is actually best as regards lubrication,oil or grease?

 

davek0974

Well-Known Member

• Nov 16, 2010

• #2

I would guess that if topped up and changed regularly then oil but the seals will have to be kept in top condition. The grease is found in most modern CV joints so it cant be bad.

 

trax99

Well-Known Member

• Nov 16, 2010

• #3

davek0974 said:

I would guess that if topped up and changed regularly then oil but the seals will have to be kept in top condition. The grease is found in most modern CV joints so it cant be bad.

Click to expand...

beat me to it.

 

Co-Pang-Yang

Well-Known Member

• Nov 16, 2010

• #4

Used grease when i replaced both swival balls as it came in the kit.
But reckon oil would be able to seep out quicker.

 

P

paul_c

New Member

• Nov 16, 2010

• #5

I'd want a good reason for going against the most up-to-date lubrication recommendation from a vehicle manufacturer.

 

T

terryds

Member

• Nov 17, 2010

• #6

philpridd said:

I know that the service spec. changed from oil to grease,but which is actually best as regards lubrication,oil or grease?

Click to expand...

Early swivels (Discovery 1)need hypoid oil to lubricate the upper bush. I tend to use both, i.e. top up with hypoid oil.
However, CV joints must be packed with grease.

 

hughesy

Well-Known Member

• Nov 17, 2010

• #7

If your bits are a bit worn, grease stays in there, oil doesn't. Simples.

 

Co-Pang-Yang

Well-Known Member

• Nov 17, 2010

• #8

Mine are early axles and i used grease as its what came in the kit.

 

aston108

Active Member

• Nov 17, 2010

• #9

how often should these be checked on a D1... and is it an easy job to do ? cheers

 

300tdistu

Well-Known Member

• Nov 17, 2010

• #10

One-Shot Grease

 

nrgserv

Well-Known Member

• Nov 17, 2010

• #11

one shot grease was brought out due to constant leaks from swivels.
good for the cv, however the wheel bearing lube should be swivel oil that flows up the stub shaft and into the hub assembly.
i use oil for this reason as its thinner and get to the bearings.
also splash lubes the top swivel as it was designed to do.