M

marti 300tdi

New Member

• Apr 24, 2011

• #1

Hi, Can anyone advise if any other Rover or other front seats will fit the 300 without massive mods, the current ones are shot and the spings have just given up on the drivers side. I have visited all my local breakers who for replacements but all sold or just as bad as mine, any help folks?

 

aston108

Active Member

• Apr 25, 2011

• #2

exmoor trim will sell you all the stuff you need to refurb the seat.. or do what I did wich is to get the foam and diaghram thingey from the passenger side of a broken 300... 20 mins and job done

 

W

wtbcneil

New Member

• Apr 25, 2011

• #3

Is it not possible to just swap the passenger squab with the drivers
Neil

 

aston108

Active Member

• Apr 26, 2011

• #4

yep.. and thats what I did

 

W

wtbcneil

New Member

• Apr 26, 2011

• #5

Cheers ashton
is it an easy swap ? probably a stupid question but im good at those
neil

 

aston108

Active Member

• Apr 26, 2011

• #6

it's easy.. take the seat out 1st. two bolts at the front and 3 torx bolts one for the seatbelt and two at the back. Then turn it upside down and unhook the diaphram... easy peasy