hef19898
Well-Known Member
So, I slowly start to get frustrated... There was clearly some delay in working on RollRoyce, but I thought I'll finally get to replace the front propshaft today. Had it soaked for three days, daily soaking included, with rust remover. Damn thing still wont get out. All I managed was to remove two bolt at the diff end.
Any ideas? My last resort would be to use an angle grinder to cut the old bolts of, but then will still be the exhaust in the way. Don't really want to ask the local stealership to replace it with an aftermarket one I have in the trunk. And besides the stealership no one will touch an old British lady over hear...
Any ideas? My last resort would be to use an angle grinder to cut the old bolts of, but then will still be the exhaust in the way. Don't really want to ask the local stealership to replace it with an aftermarket one I have in the trunk. And besides the stealership no one will touch an old British lady over hear...