A

ashleywood.ash

Active Member

• Apr 8, 2017

• #1

Ok I am most likely being stupid but I can't get the prop shaft back on. I disconnected it from front diff to fit engine and it came off fine. It now won't go back as it seems to long. I have searched but it just says "fit prop shaft to diff" am I missing something glaringly obvious?

 

blue beasty

Leaks an prone to bits dropping off

• Apr 8, 2017

• #2

Jack the chassis up a bit

 

jamesmartin

Well-Known Member

• Apr 8, 2017

• #3

ashleywood.ash said:

Ok I am most likely being stupid but I can't get the prop shaft back on. I disconnected it from front diff to fit engine and it came off fine. It now won't go back as it seems to long. I have searched but it just says "fit prop shaft to diff" am I missing something glaringly obvious?

Click to expand...

it should slide shorter relatively easily if doesnt you need to free it up or replace the prop, its easier to fit t/box end first

 

A

ashleywood.ash

Active Member

• Apr 8, 2017

• #4

blue beasty said:

Jack the chassis up a bit

Click to expand...

Hero

I really am a Buffoon when it comes to stuff like this

Also thanks James it doesn't move that well so may need to get that sorted soon

 

jamesmartin

Well-Known Member

• Apr 8, 2017

• #5

ashleywood.ash said:

Hero

I really am a Buffoon when it comes to stuff like this

Also thanks James it doesn't move that well so may need to get that sorted soon

Click to expand...

if you have to jack the chassis up youve got problems, it will put pressure on t/box and diff bearings

 

G

GATSO

Well-Known Member

• Apr 8, 2017

• #6

did you grease it while it was off ,,,,grease can stop it compressing

 

BuzzLand

Active Member

• Apr 8, 2017

• #7

jamesmartin said:

if you have to jack the chassis up youve got problems, it will put pressure on t/box and diff bearings

Click to expand...

I've jacked mine up from the Diff and it was ok, but could it cause leaks?

 

A

ashleywood.ash

Active Member

• Apr 9, 2017

• #8

GATSO said:

did you grease it while it was off ,,,,grease can stop it compressing

Click to expand...

Not whilst off but it has been greased just before