D

David Leech

Well-Known Member
Could somebody put up the size of a Front Mudflap please. Reason why is that my back flaps don't stick out far enough and so they splash mud!. I've ordered a new set of rears, going to set them out further than those on at present, and going to use the back rubbers as fronts. I've ordered a set of front brackets 'cause I haven't anything there at all at the moment. Thanks.....

26319474328_f9a9c97d9f_c.jpg
 
I'd strongly recommend buying a sheet of 3mm rubber and making your own - it's easy to make them big enough to go up into the wheelarches, which will protect your front outriggers and floors
 
Gwyn Lewis makes a protection set if you dont want to do your own. I did what Zeaphod recomends 20 years ago on my 90 an still have original outriggers and footwells.
 
I would reposition the rear ones, they are too far inboard, they need bringing out so wheel is covered.
Your cross member is the cutaway type which makes them hard to fit correctly.
 
Scooby22 said:
I would reposition the rear ones, they are too far inboard, they need bringing out so wheel is covered.
Your cross member is the cutaway type which makes them hard to fit correctly.
Click to expand...

Yep, that's what I intend to do, they were fitted by previous owner. You can see how far in they're fitted. And I've none on the front at all,at all.....

28425546519_59ebf609c5_c.jpg
 
You must log in or register to reply here.

Similar threads

new to all this
1987 LR 90 rear mudflaps
Replies
15
Views
2K
new to all this
new to all this
G
Headlamp Assemblies
Replies
8
Views
569
miktdish
miktdish
yfo866
Has anyone got any tips for bleeding 101 brakes?
Replies
12
Views
2K
yfo866
yfo866
BigRedMachine
Lost my bearings - stuck race!
Replies
11
Views
925
dag019
dag019
ChrisBduck
3.6L Land rover 90
Replies
2
Views
835
ChrisBduck
ChrisBduck