Datatek · Feb 10, 2011

Mr Fabulous said:
BTW: My 2.5 DSE is a manuel not autobox, so perhaps that's why they were fitted. I definately need them, as compared to the Nissan, the headlights are as much good as "Table lamps" glued to the bonnet!! Does anyone know if the Nissan Headlight bulbs (3 prong H4) are the same as the RR? Cos I got some serious blue zennon 120w/80w that I took off the Nissan prior to selling it........HeHeHe (Still laughing about Halfrauds & asking for a "set of Strap-ons" whilst being served by a bunch of Dicks !!Lol

Higher wattage bulbs cannot be used as they are powered by MOSFET semi conductors in the BECM that monitor current. You can fit the high efficiency bulbs of the same wattage though. Think you must have bad eyes, IMO the lights on the P38 are more than adequate for it's ability on the road.

kooky_guy · Feb 10, 2011

Datatek said:
Higher wattage bulbs cannot be used as they are powered by MOSFET semi conductors in the BECM that monitor current. You can fit the high efficiency bulbs of the same wattage though. Think you must have bad eyes, IMO the lights on the P38 are more than adequate for it's ability on the road.

If they're that bad then it might be worth checking the earths for them. I think they're behind the panel under the steering wheel.

I had dirty connections on one of mine that kept causing the rh cluster to go out so it might be worth checking them too. As Keith says, the standard setup isn't bad.

Datatek

Well-Known Member

kooky_guy

Well-Known Member

Similar threads