will76

New Member
Hi all
I think my anti roll bar bushes may be knackered and that is what's causing the front end of my truck to wobble side to side quite violently (at all speeds but not all the time) but I'm not 100%. So any advice welcomed
Recently changed suspension, steering damper, steering box and steering hydraulic pipes (last 2 really needed doing) and still the wobble persists.
I just need to know what the best way of checking is?
It was picked up for a loose bush on MOT but it tightened up. They are still tight.
I was also advised to check- the bushes at the radius arm end but again not sure how to check?
- the 3 bushes at the rear above diff (watts linkage) but they are sound
All advise welcomed
Cheers
 
Checked for rock on the wheels and all seems good. no noises etc, panhard bushes Dvr's side very slight play (passenger side great) .
had the roll bar bushes checked by garage and they are spot on. He checked all bushes and rubbers etc and all good.
I tried turning steering to full lock right and all good,
Tried full lock left and get a clunk when rocking the steering towards full lock.
Is it possible that CV joint could be knackered?
 

Similar threads