border

Well-Known Member

• Mar 1, 2015

• #1

If I loose the 3 bolts that hold the front exhaust downpipe to the turbo, will it just drop and lay on the floor? or will I have to loose it off underneath at the next join??.
Need to get at my stater motor, looking at other posts this is the easiest way??
Thanks

 

jamesmartin

Well-Known Member

• Mar 1, 2015

• #2

it will need undoing further along at first joint

 

border

Well-Known Member

• Mar 1, 2015

• #3

Thanks, thought it would have just lay on the floor.
Best get some WD 40 on the bolts for a couple of days before I have a go.

 

S

satchmolips

Active Member

• Mar 2, 2015

• #4

and depending on your vehicle you may need to remove the round gearbox cross member which bolts across the chassis, I always have to

 

top drive

Well-Known Member

• Mar 2, 2015

• #5

yeah some idiots have been known to fit engines gear boxes and nip them all down ..... then try and fit the downpipe .........

DOH !

Use your farm jack to spread the chassis and the cross member drops out once