The loom has all the connectors on it, yes? So is plug and play
Door card and Kick panel off, I would guess to reveal the connectors.
Looking online at the part number the loom is not very long so would not think it goes up behind the dash.
1hr of a job including a tea/fag break
Except a few broken clips maybe.
Go on be brave and just go for it, you sound a little hesitant to dive in, what could go wrong its a landie.
J
Usually the main connector is just inside the door from the frame, getting the rubber grommet off can be the worse of it …
A smear of Vaseline in the grooves will help thatCrappy switch or earth.
But ****ty window glass seals will give extra resistance.
J
Could that indicate a bad earth somewhere? Or a problem with the switch?
Hi Marion,
I'll check the switch. No earth as such on the door loom... The polarity of the Voltages in the loom is set by the switch.