K

Karls

Active Member

• Sep 20, 2017

• #1

1985 90 Truck Cab, wind-up windows (5mm thk glass):

I'm going to do a complete rebuild on the front doors but concerned about whose make of parts to use for the glass surround seal/channel etc. I'm wary of using Britpart but no doubt oem will be prohibitive once all the parts are costed up for both doors.

Any suggestions please? Are there better products out there off the shelf?

 

tottot

Well-Known Member

• Sep 20, 2017

• #2

Try Bearmach,found them to be pretty good.

 

Ian Maycock

Well-Known Member

• Sep 20, 2017

• #3

I did the doors on my 110 200tdi the felt channel I got off eBay a seller on there cuts them all to size and sells them as a set , the plastic channels I used britpart Oem parts and some Bearmach parts as like you said cost but even these are not cheap .

 

Lawson86

Active Member

• Sep 22, 2017

• #4

I've got all the bits sitting in my hall, ordered them from sp4x4, think they are all bearmach branded parts though, seem good quality and arrived next day.