LordOWar

Well-Known Member

• Sep 22, 2021

• #1

Hi all, I'm just trying to replace the front pinion seal but the nut won't shift. It's not a left handed thread is it? I have a feeling there may be thread lock on it but thought I would check before the big hammers come out Thanks

 

B

brian1964

New Member

• Sep 22, 2021

• #2

Make sure the split pin is fully out before trying the big stick. I had to get a 36inch stilson on the housing and then a scaffold pipe extension on my socket bar before mine came off.
I can't remember the torque setting, but I do remember that it was pretty high.
If you have access to an pneumatic impact driver it should come off easily.
Good luck

 

B

brian1964

New Member

• Sep 22, 2021

• #3

Just found the Torque setting it's 85 lb foot so it shouldn't come off without a lot of force
Good luck

 

LordOWar

Well-Known Member

• Sep 22, 2021

• #4

Split pin is all out. I tried my electric impact driver but it didn't move. I never had this trouble with the back one! I will put some heat on the nut and see how we go.

 

LordOWar

Well-Known Member

• Sep 22, 2021

• #5

Got it off. Heat and impact gun got it in the end. It looks like thread lock all over the thing!

 

B

brian1964

New Member

• Sep 22, 2021

• #6

Well done!
Now all the fun of renewing the oil seal!
Good luck