G

Gibbo1982

Member
Hello I have a Freelander 2005 and I'm looking for a little help and advice.
PXL_20240612_174835960.jpg
Took the towing eye cover off and my front cross member is rotten. I can't take the bumper off until I go to my dads at the weekend, so I was wondering if anybody had experience with them. Is it bolted in place or welded?
If it can be removed from the car I can weld it at work but if it has to be welded in place its more of an issue for me.
 
Last edited:
..maybe a “hello” and “I have a Freelander 1 20xx and I’m after a little help and advice” might get you somewhere, rather than just joining and making this your first post!

C’mon - it’s a friendly bunch here (mostly :cool: )
 
Last edited:
Mine's a '99 model, so may be different, but that area on mine looks like this....

1718268373700.png
 

Attachments

  • 1718268323791.jpeg
    1718268323791.jpeg
    337.5 KB · Views: 92
ChrisMidWales said:
Do you remember how thick the metal was? I know I can get a winch tray that I assume fits to that so it must be quite tough.
Click to expand...
Don't know sorry - not a 5 minute job to take the skin off either.

You'd have thought it was pretty robust going by its mounts.
 
Looks different to the 04 model
 

Attachments

  • 20180608_123011.jpg
    20180608_123011.jpg
    530.4 KB · Views: 80
  • 20180601_193432.jpg
    20180601_193432.jpg
    588.8 KB · Views: 87
You must log in or register to reply here.

Similar threads

P
Removable cross member MAER chassis
Replies
14
Views
1K
tottot
tottot
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
3
Views
797
tottot
tottot
L
Rotten front cross member
Replies
11
Views
1K
Anaconda
A
C
repairing bulkhead in situ
Replies
2
Views
312
ER1C
ER1C
G
Freelander 1 Another Newbie
Replies
15
Views
1K
GrumpyGel
GrumpyGel