D

davidlampard

Member

• Oct 22, 2013

• #1

Hi.
I have to replace the front chassis section where the bumper goes on. And the spring mount.
I can repair whay I already have or I could replace. Means I will have to remove the spring mounting. The springs look Very tough. Are they a pain to get back into the mount once dropped? This will prob determine if I repair or replace....

 

blue beasty

Leaks an prone to bits dropping off

• Oct 22, 2013

• #2

Easy enough with a bit of jiggling though don't be suprised if the bush inner comes out with the bolt

 

D

divie

Well-Known Member

• Oct 23, 2013

• #3

I have recently had mine done, you can buy the chassis section for around £35/40 per side.I did not trust my welding and Nitemare of this parish did mine. Real superb job,do a search or go back a good few pages to find "welding chassis" plenty of pictures from my motors work in progress. Nitemare has a jig to line up the spring positions all in all a superb job.

 

N

NiteMare

New Member

• Oct 23, 2013

• #4

i guess i'll jump in here (Thanks for the recommendation Divie), here's a link to Divies chassis repair thread

http://www.landyzone.co.uk/lz/f6/welding-chassis-235075.html

also in there is a photobucket link to the repairs i've done on my own 109, plus with a little lateral searching you could find the repairs i've done to my 88"

chassis repairs are rapidly becoming my speciality :lol:

 

D

davidlampard

Member

• Oct 23, 2013

• #5

Thats a superb repair!! Good job! Good jig! I may have to make one!!

 

L

luke1838

New Member

• Oct 30, 2013

• #6

Regarding getting the springs off I had to use heat to mine off the expand and shrink the metal and finally come off. Can be right pain to get them off.