D

davy disco

New Member

• Feb 21, 2010

• #1

HELLO EVERYONE , has eneyone come across the bottom threds coming out of the bracket .
The reason i found this problem i noticed only half the disc is got fresh rust on it.
Will i need a new bracket?
And has enyone had rusty nuts on the front turrets ,it seams the two on the back are shot and this is on both sides

 

listerdiesel

Well-Known Member

Events Planner

• Feb 21, 2010

• #2

Which Series of Disco? Which year?

Peter

 

D

davy disco

New Member

• Feb 21, 2010

• #3

Its 2000 2 series entry model

 

D

davy disco

New Member

• Feb 21, 2010

• #4

its a 2000 2 series

 

MartinK

New Member

• Feb 21, 2010

• #5

davy disco said:

HELLO EVERYONE , has eneyone come across the bottom threds coming out of the bracket .
The reason i found this problem i noticed only half the disc is got fresh rust on it.
Will i need a new bracket?

Click to expand...

I would suggest if the bracket is damaged, then you will need a new one. The front caliper carriers (Part # STC1917) are over £100 as a new part!!!!! Once it's off you could look at getting it re-threaded in some way, but personally I would buy a new one, and not risk any problems... I'm always cautios as far as braking is concerned...

And has enyone had rusty nuts on the front turrets ,it seams the two on the back are shot and this is on both sides

Click to expand...

No - my nuts are in good shape thanks.

 

Last edited: Feb 21, 2010