tlo

Active Member

• May 7, 2018

• #1

does any one have a link/tut on how to remove the front bumper on a face lift 2006 td4 ? I have to change the condenser. Is that straight forward ? thanks

 

tlo

Active Member

• May 8, 2018

• #2

What no one had to change one or remove the bumper you lucky lot

 

GrumpyGel

Well-Known Member

• May 8, 2018

• #3

Fraid I don't have a posh facelift

 

G

guineafowl21

Well-Known Member

• May 8, 2018

• #4

tlo said:

does any one have a link/tut on how to remove the front bumper on a face lift 2006 td4 ? I have to change the condenser. Is that straight forward ? thanks

Click to expand...

Did mine a while ago, so details are sketchy, but as I remember it’s just a case of wiggling it to see where the next fastener was...

Free it at the slam panel/headlights, then underneath where the undertray goes. Then there are some sods inside the wheelarch that you’re best just snapping away and replacing with cable ties.

Of course, almost every fastener is different, so take your time.

 

tonytherunner

Active Member

• May 8, 2018

• #5

https://workshop-manuals.com/landro...ings/repairs/bumper_assembly_front_from_04my/

 

tlo

Active Member

• May 8, 2018

• #6

GrumpyGel said:

Fraid I don't have a posh facelift

Click to expand...

Sometimes I wish I didn't either
Thanks lads I will have a go just after I have done the shoes and pads, not as many screws as I thought I know that the drivers side screw were it bolts to the bumper in the wheel arch is broken

 

G

guineafowl21

Well-Known Member

• May 8, 2018

• #7

tlo said:

screw were it bolts to the bumper in the wheel arch is broken

Click to expand...

1. Abuse screw and clip until they fall off.
2. Drill holes in mating parts.
3. Insert cable tie and forget.