F

forever

Active Member
So thought this would be easy always replaced my own pads and discs, but all the part numbers have been superceeded, prices range from 9.00-60.00!!
Any recommendation for which parts I need and from where???
Cheers all
 
Hello jamesmartin, I'm after new (front & rear) discs & pads for my 2000 def. TDI, front discs are ventilated.
Online suppliers have many with different numbers of bolts! etc. which would fit my standard Defender TDi ?
 
200tdi has drum rear as std ,vented discs are ftc902 and rears are ftc1381 unless its a salisbury axle ,what bolts etc are you after
 
Thanks for your reply jamesmartin.
My defender is a 2000 (build year) TD5, sorry for the confusion.
I need brake discs & pads. The front discs are ventilated (that is the discs have holes/slots in the middle):eek: The VIN is YA192015, this may help.
 
slotted discs arent std but aftermarket ,std vented discs are ftc902 pads stc1275 ,ftc3375 caliper bolts are often best replaced and removed with 1/2 bihex socket
 
Last edited:
Sorry to drag up an old thread, but what pads and caliper bolts would be requried for a 94 ex-mod 110? I've been looking around and there seem to be different systems.

Also, is any particualr make of pads recommended?

I'm not sure if they need changed, but I thought I might as well get them to hand for when I check as I'll need them at some point anyway.

Thanks!
 
My 90 is fitted with a 50th anniversary front axle (vented discs). Is part numbe FTC902 valid for this axle too? (I have been told that the discs are identical to 110 discs).
 
sp00k said:
Sorry to drag up an old thread, but what pads and caliper bolts would be requried for a 94 ex-mod 110? I've been looking around and there seem to be different systems.

Also, is any particualr make of pads recommended?

I'm not sure if they need changed, but I thought I might as well get them to hand for when I check as I'll need them at some point anyway.

Thanks!
Click to expand...

ftc3375 is the bolts stc1275 for pads
 
reiny said:
My 90 is fitted with a 50th anniversary front axle (vented discs). Is part numbe FTC902 valid for this axle too? (I have been told that the discs are identical to 110 discs).
Click to expand...

yes all 90/110/disco1/rrc vented are ftc902 as solid are frc7329 ,its only rears where 110 differs to the 90s and the others
 
Hang on you lot!!

He still has to get through the doors you know!! ;);)

However, on my 1990 vintage 110 the caliper bolts are 13mm BiHex and he disc to hub bolts are 14mm BiHex, so it will depend upon the age as to them being 1/2" or 13mm metric.
 
You must log in or register to reply here.

Similar threads

dconnrt
80's 110 - Braking pulling to the right in wet conditions
Replies
5
Views
253
dconnrt
dconnrt
R
Brakes
Replies
9
Views
882
rubix101
R
chrisstdt
Front caliper fitment
Replies
0
Views
654
chrisstdt
chrisstdt
S
Freelander seized brakes and transmission fluid
Replies
8
Views
485
Freddie17
Freddie17
new to all this
D2 1999 ES going up for sale
Replies
1
Views
887
new to all this
new to all this