ivancrx

Well-Known Member
Hi, I am in the process of refurbishing 2 Discovery axles to fit to my 1990 Defender 90 Truck Cab. The rear is nearly complete just waiting on a couple of parts before rebuilding it so no problems there.

I have been looking at the front axle and the brake callipers have 2 hoses fitted to each side where the defender only has one. the question I have is can the callipers be used off the discovery axle and if not will the defender ones fit direct to the discovery axle?

Next question is I seem to think I have read somewhere that I will need front radius arms off a discovery to fit the front axle, can any one confirm this?

I have had a search but can't find anything on the brakes.

As always any help is most appreciated.
 
discovery 2 do you mean 300tdi disco 1, if so you can swap caliper for 300 tdi defender ones or use a y piece to feed both disco ports, you need the wider disco radius arms
 
The axles were supposed to be from a 1994 200tdi disco, but there is no markings on them.
 
Looking for a pair of Disco front radius arm if anyone can help, close to Burton On Trent if possible?
 
Later Defender radius arms are the same 300tdi or very late 200tdi one's.
 
Hi

many thanks for that, I think I may now be sorted if V8 Discovery 1 are the same?

If they aren't there's a land rover breakers just outside Swadlincote call Alldrive, you'll have to google them for their contact details


Might be worth a try
 

Similar threads