tyre man dave

Active Member
hi all

looking into upgrading my 110 front axle to vented disc,s
either complete axle swap out
or swop out hub units bits


any help or throughts on the matter would be good
 
don't see the point myself :)

vented are useful where you brake a lot or have very heavy loads, so they cool quicker and less likely to have fade.

other than that, changing the solid discs and pads for a better compound would probably make more difference
 
hi all.
need some help advise please
got callipers all plugged in no leaks at all
carn,t seem to get a pedal
will I need to upgrade servo

any throughts
 
hi all.
need some help advise please
got callipers all plugged in no leaks at all
carn,t seem to get a pedal
will I need to upgrade servo

any throughts

There shouldn't be an issue. Are you manually bleeding them or using a pressure pot/sunction pot ?? Have you checked that all the connections in the brake line are tight? No bends in the brake pipe stopping flow? Are the Callipers seized?
 
just what I could get hold of at the time.
think I have sorted problem out servo looks a bit past its best will try swopping that over
 

Similar threads