G

gemsta

New Member

• Jul 22, 2019

• #1

Hss anybody else had difficulty connecting a clutch slave cylinder pipe to a master cylinder pipe on a freelander 1 td4? I've replaced my slave cylinder but can't get them connected.

 

G

guineafowl21

Well-Known Member

• Jul 22, 2019

• #2

What tool are you using to push the locking ring in? There’s a proper tool, but I used a screwdriver or a pair of needle-nose pliers.

They may not go together if there’s pressure/lack of give in the hydraulics. Is your clutch pedal all the way back up?

 

G

gemsta

New Member

• Jul 22, 2019

• #3

Im trying to put them together not apart, and yes clutch pedal is all the way back up. the part is from britpart so im guessing its a dodgy part.

 

Nodge68

Well-Known Member

• Jul 23, 2019

• #4

gemsta said:

Im trying to put them together not apart, and yes clutch pedal is all the way back up. the part is from britpart so im guessing its a dodgy part.

Click to expand...

In my experience, Britpart should be avoided at all costs.