Hi people.
Just bought Freelander XEI 1999 3D Softback. All fine except this.
When you open the door, window is supposed to lower by inch (or ~20mm) as reviews say. But it barely drops a 2mm. But it is enough to open the rear door.
When I close the door, window lays over the edges of the soft cover because it did was not lowered enough. And after door being shut, it raises the same small 2mm, making the top edge of the window not entering into its place, but laying at the car. This makes large holes betweed glass and the car.
And when you turn your ignition to II, strange noise appears first from the rear area - as if some motor runs - rear window do not move.
All other modes are OK - you can lower and close the window - if you close it from the lower position - it fits as designed - being under all covers.
Please, advise!
Just bought Freelander XEI 1999 3D Softback. All fine except this.
When you open the door, window is supposed to lower by inch (or ~20mm) as reviews say. But it barely drops a 2mm. But it is enough to open the rear door.
When I close the door, window lays over the edges of the soft cover because it did was not lowered enough. And after door being shut, it raises the same small 2mm, making the top edge of the window not entering into its place, but laying at the car. This makes large holes betweed glass and the car.
And when you turn your ignition to II, strange noise appears first from the rear area - as if some motor runs - rear window do not move.
All other modes are OK - you can lower and close the window - if you close it from the lower position - it fits as designed - being under all covers.
Please, advise!
