No Pompey, its a 1.6 cvh efi engine. It's a nightmare to find parts sometimes. Have you tried Ford, as sometimes if the is obsolete. They'll give you the last finis code. Then Google that number, normally you'll find the part. Good luck with your search. :)
 
Found the part I required ordered it, then got a refusal notice, Part not available, not important I am the choke at the moment :) cant remember, apart from the boat, the last vehicle I had with a manual choke
 
Pompey said:
Found the part I required ordered it, then got a refusal notice, Part not available, not important I am the choke at the moment :) cant remember, apart from the boat, the last vehicle I had with a manual choke
Click to expand...

Rubbish service that, my mk3 Escort had manual choke and my old mk3 fiesta. I prefer carb engines, took me the best part of a year to get the efi engine running right. It's a nippy little car now though, only 110 bhp but car weighs less than 800kg. :)
 
22mm wheel nut covers, greased inside to cover my rusty nuts lol :D

DSC_0757_zpsin2ge7kp.jpg


DSC_0758_zpsicux4slw.jpg
 
Last edited:
JC600 said:
Yeah, spot on. Tried one to start with, to make sure I could remove them. :)
Click to expand...

Your BBS rims have shallower holes than my Trek rims. I expect they would be more difficult to remove from mine. They look perfect on yours though. ;)
 
Nodge68 said:
Your BBS rims have shallower holes than my Trek rims. I expect they would be more difficult to remove from mine. They look perfect on yours though. ;)
Click to expand...

Cheers, I had them on my old Freelander. On the 16" alloys. They come with 2 sizes of removal tools too. :)
 
Brought a leather refurb kit to do my RS 4 spoke steering wheel. Had loads left over, so I repaired the steering wheel in the Freelander.

Before

DSC_0778_zps2zpcmiu1.jpg


All done, and leather protector applied.

DSC_0784_zpsrcr0pjk5.jpg


Also found a collar, so I could tie the top the gear lever gaiter up.

DSC_0780_zpssqdlfvu2.jpg
 
Steering wheel came up nicely!. What did you use to restore life back in to it? Mine currently looks like your original picture :(
 
Thanks, will give it a go. I've seen things like this, but always been a bit sceptical. But the finish looks a great improvement. :)
 
Nodge68 said:
What's wrong with the Vortex rims then?
Click to expand...

2 keeping leaking on the rims, been cleaned up twice now and resealed but still leaking. Have to pump them up every week. Was going to get them refurbished, but a lot of money if they still leak afterwards. :(
 
JC600 said:
2 keeping leaking on the rims, been cleaned up twice now and resealed but still leaking. Have to pump them up every week. Was going to get them refurbished, but a lot of money if they still leak afterwards. :(
Click to expand...
I had 1 of my Trek rims leak after my Maxxis 771 were fitted. I had to pump it up weekly for about 6 months. Strangely the leak stopped after I swapped the wheels from side to side. I assume the tyre has bedded in and so stopped leaking.
 
You must log in or register to reply here.

Similar threads

torr_td4
2005 Freelander TD4 cutting out
Replies
2
Views
779
Freddie17
Freddie17
F
My 2006 Freelander TD4 Commerical
Replies
8
Views
608
Andy Warren
Andy Warren
acidK1
Fancy a laugh, wiring question
Replies
2
Views
601
acidK1
acidK1
davidcarretero
Freelander 1 TD4 continues running after key removed
Replies
7
Views
970
davidcarretero
davidcarretero
H
Love hate relationship with my Freelander 1 TD4... No Revs..
Replies
7
Views
953
hd3
hd3