Rscabrio · Mar 4, 2017

Hmmmm might try mine unplugged again seams to be playing up a bit proper gutless and have a major missfire around 2 k revs

JC600 · Mar 5, 2017

Rscabrio said:
Hmmmm might try mine unplugged again seams to be playing up a bit proper gutless and have a major missfire around 2 k revs

Worth a try.

Philgt50 · Mar 9, 2017

JC600 said:
Worth a try.

I am falling behind here JC600 but finally got my sump guard on today yehhhh. I will take pictures soon! I really do have a Freelander honestly
haha.

JC600 · Mar 9, 2017

Philgt50 said:
I am falling behind here JC600 but finally got my sump guard on today yehhhh. I will take pictures soon! I really do have a Freelander honestly
haha.

lol.....its not a race haha. Cool, look forward to some pics.

JC600 · Mar 24, 2017

Got some aero wiper blades today, also a set of side rubbing strips. Will fit the blades tomorrow. But had to untwist and straighten the rubbing strips. And have now clamped them between some wood to hopefully flatten them. Will leave them a week before fitting.

pardec · Mar 25, 2017

put them out in the sun if you can

JC600 · Mar 25, 2017

pardec said:
put them out in the sun if you can

There outside now, cheers. Going to leave them a week or so before fitting.

JC600 · Mar 25, 2017

Got my aero wiper blades on.

blue beasty · Mar 25, 2017

Cuz wiping bubbles is bet...teeeer....

JC600 · Mar 25, 2017

blue beasty said:
Cuz wiping bubbles is bet...teeeer....

Theys mint too!!!

Nodge68 · Mar 25, 2017

JC600 said:
Got my aero wiper blades on.

I fit aero blades to very vehicle I own or service. They are so much nicer than traditional blades. And cheaper these day's too.

JC600 · Mar 25, 2017

Nodge68 said:
I fit aero blades to very vehicle I own or service. They are so much nicer than traditional blades. And cheaper these day's too.

Normally the first thing I do as well, but kept saying 'I'll do it later'.

Alibro · Mar 25, 2017

JC600 said:
Normally the first thing I do as well, but kept saying 'I'll do it later'.

I just fitted Bosch blades from Carparts4less. Not aero but £8.20 delivered.

JC600 · Mar 25, 2017

Alibro said:
I just fitted Bosch blades from Carparts4less. Not aero but £8.20 delivered.

Ive just removed standard Bosch blades, they were rubbish lol

Nodge68 · Mar 25, 2017

I always find AP aero blades good.
http://www.ebay.co.uk/itm/22-21-Lan...d41ccbf&pid=100005&rk=5&rkt=6&sd=370965768913

tonytherunner · Mar 26, 2017

I have a set of Valeo aero wiper blades 22" 21" almost £16 ......really a good product.
Cheap aero blade is a waste of time.....

Nodge68 · Mar 26, 2017

tonytherunner said:
I have a set of Valeo aero wiper blades 22" 21" almost £16 ......really a good product.
Cheap aero blade is a waste of time.....

Not AP aero blades. They last 2 years without an issue. I've been using them for nearly 10 years and never had one fail.

JC600 · Mar 26, 2017

Gave her a good wash, coat of Polish and wax.

Colonial · Mar 26, 2017

JC600 said:
Some interesting facts.

Back on topic now, the Freelander is going to my brothers tomorrow to have new rear diff seals, diff mounts and the new fuel tank cradle fitted.

Pics of cradle, plates aren't too bad. But tubes have rotted through and split.

I've got the '55' plate. A previous owner lived in Conwy. Either the salt-air or driving on the beach meant that I had to replace the fuel tank cradle. The whole thing had rusted through. I put several coats of Hammerite Green on the new one before fitting.

JC600 · Mar 29, 2017

vavuorinen said:
Does anyone have cutting template for VUB500870? I just receiver kit, but package was damaged during transport one light assy and cutting template is missing..

I have RH VPL1293 pod assy with mountig plate, but other one is missing. Does anyone have serialnumber for that?

Ive got a copy of the template.

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Leaks an prone to bits dropping off

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads