R

RobBentley

New Member

• Apr 20, 2009

• #1

Hi All.

I bought my FreeLander 3dr Sport Premium because it was going for a song and was fully loaded with every possible extra, leather seats, sound system, parking sensors, heated front screen - the lot.

Naturally the downfall of this machine is its low ground clearance, even compared to the normal freebie.

So having thought about it... is there any suspension kits that, without spending massive amounts of money modifying other components, could be fitted to the Sport to give it normal or even better than normal ground clearance?

I'm thinking i'll end up with quite an awsome little 3dr off-road buggy!


Cheers,

 

freebiker

Well-Known Member

• Apr 20, 2009

• #2

You could try the spacers that fit on top of the struts, cheapest i've seen these for is around £200 inc the camber pins to correct ur wheel camber.

This is the option i'll be taking once i've finished spending money fixing bits and peices on it lol.

 

Optimus Prime

Well-Known Member

• Apr 20, 2009

• #3

doobreydog's ya man. lifted and gifted as I think he refers to himself. thinks it's a 2" lift on his.

 

freebiker

Well-Known Member

• Apr 21, 2009

• #4

Aye he's right. Doobreys got a photo of his lifted playin in the snow a few posts back i think. Tis a pretty nice motor.

 

Kernow nige

New Member

• Apr 21, 2009

• #5

crewebiker said:

Aye he's right. Doobreys got a photo of his lifted playin in the snow a few posts back i think. Tis a pretty nice motor.

Click to expand...

Could it be this one.......

 

Attachments

• 
  bullbar.jpg

  74.9 KB · Views: 13,926

doobreydog

Active Member

• Apr 21, 2009

• #6

Depends on what your using it for....

If just for occasional greenlanes/off road then best/cheapest option will be to get hols of a cheap set of steel wheels and stick some 215/80/15s on and just keep them for when you need...

Lift kits available from about 100 quid ...dont bother with camber correction

Get hold of suspension from standard freelander and fit that....straight swap..

Lots more ...depends on what your using it for

 

R

RobBentley

New Member

• Apr 22, 2009

• #7

ooh - suspension from standard one seems an attractive idea. How much would you rekon it costs?

 

Chaser

New Member

• Apr 23, 2009

• #8

any reason why you can't put the standard coils on your struts??

 

freebiker

Well-Known Member

• Apr 23, 2009

• #9

I remember reading somewhere that on the sports KONI adjustables were used, not sure if these would take the standard coils. May be wrong though. In fact i'm probably wrong. I'm definately going with the spacer option when i get round to it myself.

Unless... i can find some nice red coils that will lift my struts. That'd look proper mint.

 

TD4_4x4

Active Member

• Feb 26, 2010

• #10

So using a 'lift kit' for a 30 mm dropped sport freelander or normal ride height version, means you ditch the original shocks and springs?

Thus meaning a sport freelander with a lift kit is the same raised height as a non sport with a lift kit?

Just want to check!

 

freebiker

Well-Known Member

• Feb 26, 2010

• #11

Depends how you want to do it, you could probably purchase the standard struts and coils for the non sport freelander and swap them over to give normal ride height, or you could fit the spacers on top of your current sport struts to give normal ride height. It's roughly the same price to do either... the spacers being only slightly cheaper depending on where you can source them.

 

doobreydog

Active Member

• Feb 26, 2010

• #12

you gotta remove struts to fit a lift kit so not much difference in job......plenty of used standard suspension available new or used.....not as many sport available used so normally sell at bertter price.....if you do job yorself with used parts you should end up quids in

 

Chaser

New Member

• Feb 26, 2010

• #13

TD4_4x4 said:

So using a 'lift kit' for a 30 mm dropped sport freelander or normal ride height version, means you ditch the original shocks and springs?

Thus meaning a sport freelander with a lift kit is the same raised height as a non sport with a lift kit?

Just want to check!

Click to expand...

No, as far as I know the lift is gained by fitting spacers between the top mounts and body so you wouldn't normally touch the springs etc.
So if you started 30mm lower than standard you would still be 30mm lower after lifting.

 

tonyt37

Active Member

• Feb 27, 2010

• #14

Sounds like alot of messing about for 30mm!

 

TD4_4x4

Active Member

• Mar 9, 2010

• #15

Thanks for all the advice everyone, and Chaser on the last one that explains everything.