Gilknox

New Member
Hi all new to the site and help would be appreciated.
the problem is with my landrover freelander td1 2L Diesel, 1998.

so was driving my freelander down the road when all a sudden the clutch peddle got stuck to the floor ,so i lifted the peddle while in gear to get me back down the road, mechanic said needed the clutch slave clyinder and master cylinder unit.

so i fitted a clutch slave cylinder and master cylinder unit. which wasn't to bad , which has now left me with no pressure in the clutch peddle and i have looked about for a bleeding nipple and cant find any anywhere on the units or the old one that i took out. Ive checked on the forums and online and was unable to find any details on how to bleed this , was wondering if anyone had any ideas on how to continue or at-least start with this.
Thanks in advance for any help in finding how to bleed this!
 

Attachments

  • IMG_1760.JPG
    IMG_1760.JPG
    306.5 KB · Views: 3,146
  • IMG_1759.JPG
    IMG_1759.JPG
    370.3 KB · Views: 4,971
  • IMG_1756.jpg
    IMG_1756.jpg
    454.6 KB · Views: 1,237
  • IMG_1758.JPG
    IMG_1758.JPG
    448.2 KB · Views: 3,328
  • IMG_1757.JPG
    IMG_1757.JPG
    380.8 KB · Views: 1,733
There should be no need to bleed your clutch as hydraulic system as it should of come filled.

Double check that you have fitted it correctly.
Post this in the freelander section. Also introduce yourself in the right place mate, peeps get funny about things like that.

Dunc
 

Similar threads