Funkykipper

Funkykipper

Green Laning Activist.
Forum Sponsor
I'm after an extra pair of hands in Nuneaton with an incredibly awkward steering box drop arm removal. :doh: :doh:

Just to assist and share bruised hands and fingers as it's becoming a drain on my human resources.


Any help would be gratefully received as soon as possible.
 
Have a look on the lzir map and see who's close then drop a text to Daft....someone might be sat around feeling bored

I'd do it for you but have trouble with the map on my phone :eek:
 
Funkykipper said:
I'm after an extra pair of hands in Nuneaton with an incredibly awkward steering box drop arm removal. :doh: :doh:

Just to assist and share bruised hands and fingers as it's becoming a drain on my human resources.


Any help would be gratefully received as soon as possible.
Click to expand...

good luck, mine was awful on the fender.

i gave up and took a angle grinder to it. that worked :D
 
If yew still need help, let me know.

I have prople for dinner, but can come tomorrow if it gets that bad.
 
Funkykipper said:
I'm after an extra pair of hands in Nuneaton with an incredibly awkward steering box drop arm removal. :doh: :doh:

Just to assist and share bruised hands and fingers as it's becoming a drain on my human resources.


Any help would be gratefully received as soon as possible.
Click to expand...
just done one of them, started 6pm last night, knocked off at 2 this morning, carried on at 9 this morning, the arm popped at 2 this aft.

first made one of these



which didn't do a right lot apart from wheeze the relief valve at 2 tons,
so got cheesed off and made this for the press.
arm popped at 7 tons.

 
All done



Well it's orft anyway



Funky, please thank Mrs Kipper fer the cake

Piccies will be posted later :)


Wonder if it'll keep till the BLRG cake run on the 8th :D
 
Bromsgrove Defender said:
All done



Well it's orft anyway



Funky, please thank Mrs Kipper fer the cake

Piccies will be posted later :)


Wonder if it'll keep till the BLRG cake run on the 8th :D
Click to expand...

Thanks for the help mate. Although it was a bastid to get off we beat it in the end.

Enjoy the cake.
 
Thanks to everyone for the offers of help and a massive thanks to big Steve. Well he will be after eating all that cake. :D :D
 
they are such a poor idea, changed one once best way is box off cut arm off and fit with a disco one, they are track rod ends so the arm stays on the box for ever and you can just spin a new track rod end on with ease.
 
James1966 said:
they are such a poor idea, changed one once best way is box off cut arm off and fit with a disco one, they are track rod ends so the arm stays on the box for ever and you can just spin a new track rod end on with ease.
Click to expand...

This one was properly welded on.

it took a serious amount of grinding and whacking with a very large hammer and a half shaft to get it off.
 
Take the nut off and drive down a rattly green lane/few kerbs etc, usually works but ends in death of driver :D
 
You must log in or register to reply here.

Similar threads

Alibro
Clutch change in a TD4 (list of jobs to do)
2
Replies
30
Views
13K
NUM427F
N
Vstar
Freelander 1 Some advice / a quick guide to those changing the in tank fuel pump on a td4
Replies
0
Views
4K
Vstar
Vstar
300bhp/ton
Adding Bluetooth to factory head unit - guide 99+ p38a's
Replies
18
Views
17K
MacMan6107
MacMan6107
Saint.V8
  • Sticky
200TDi Timing Belt Change and Cylinder head Refurb How To....
Replies
5
Views
14K
IamRobbie
IamRobbie
Saint.V8
200TDi Timing belt change and cylinder head refresh HOW TO...
Replies
6
Views
9K
toms3
T