RAVE error - I cant seem to start a new thread (despite over 50 posts)- hence posting this here.
The workshop manual seems to contain an error in relation to the wiring for the ABS / ETC on post 99 vehicles.
Ive checked the downloaded version and the online version at
Land Rover Workshop Manuals > Range Rover P38 > 70 - BRAKES - ABS > DESCRIPTION AND OPERATION > ANTI-LOCK BRAKE SYSTEM - DESCRIPTION > Page 990
If you read the wiring for the 9 pin block C0505 It shows that Pins 1 & 2 should be wired to the front left sensor (my vehicle FL sensor is wired to pins 7&8)
The diagram also shows that pin 3 is not connected - yet the text says pin 3 goes to the right rear wheel sensor.
Any ideas? Is there an addendum to show the known errors?