Was just a thought cos I couldent find someone to activate them in becm but would prefer them to operate as fogs if anyone can do it for me near leeds?
 
Make sure the becm has a "H" (for High line) written on the becm label (on top of the becm fusebox). The Low line becm does not support front fog lights.
 
davidg said:
Make sure the becm has a "H" (for High line) written on the becm label (on top of the becm fusebox). The Low line becm does not support front fog lights.
Click to expand...

Realy? Thought all rangies had fogs execpt the diesel autos but thats down to the oil cooler
where is the label?
 
The Low line becm was a cost down version compared with the high line version and supported fewer features eg front fog lamps. A high line becm will work correctly in a low line becm vehicle but not the other way around.
 
just been out and checked and it is a high line becm
when i was in there i noticed there is a few empty slots in the fuse box most on the diagram showed should be empty but no fuse in slot 18 and the diagram shows a 30a fuse should be in. whats that power?
 
gfromleeds said:
just been out and checked and it is a high line becm
when i was in there i noticed there is a few empty slots in the fuse box most on the diagram showed should be empty but no fuse in slot 18 and the diagram shows a 30a fuse should be in. whats that power?
Click to expand...

5,16,18,19,21. Not used. What year diagram are you looking at?
 
You must log in or register to reply here.

Similar threads

G
Identify this winch bumper
Replies
9
Views
700
Gingerbread
G
P38 guy
P38A Aftermarket remote
Replies
1
Views
253
pwood999
pwood999
A
Repro Fog lamp switch
Replies
3
Views
755
aldy
A
R
Tricky electrickery on the old pig
Replies
18
Views
786
resto_d1
R
L
LCM recode
Replies
16
Views
2K
backinblack
backinblack