xpuser8334
Active Member
Hi All.
I have a 2007 (07 Plate) Freelander 1 - M47R Engine - Yes Definitely a Freelander 1 Facelift 3 Door Adventurer.
When I get in the car - key in ignition, turn the key, sometimes the temp gauge will shoot to the top with the red warning light..
3 Amigos - sometimes 2.
Turn the key and it can sometimes turn over and fire normally..
or turn the key and it might turn over for about 30seconds.. then the LPFP will be heard and it fires up.
Turn the key - turns over - gauges look normal - not LPFP - then the pump kicks in after about 15 seconds. and it fires.
I have changed:-
Ignition Switch for a brand new Genuine one
Fuse Board under the bonnet
Fuse board under the steering wheel
Cant remember if I changed the CCU.
I have added additional earths from the ECU to the Battery -ve terminal.
Inspected the Ignition switch loom to wiring harness / fuseboard.
Replaced GlowPlugs.
no error codes - except low pressure - which I expect as the fuel pump isnt running straight away.
I have NOT changed the immobiliser box behind the clocks, nor have I changed the pickup coil around the ingintion switch.
Has anyone else had this issue.
ironically.... if its damp / cold weather - it starts up straight away.
All Live Data for HPF Rail and LPFP looks good.
Today saw a new fault where any fob didn't really want to unlock the car - so I'm going to swap the CCU this week.
any takers????
I have a 2007 (07 Plate) Freelander 1 - M47R Engine - Yes Definitely a Freelander 1 Facelift 3 Door Adventurer.
When I get in the car - key in ignition, turn the key, sometimes the temp gauge will shoot to the top with the red warning light..
3 Amigos - sometimes 2.
Turn the key and it can sometimes turn over and fire normally..
or turn the key and it might turn over for about 30seconds.. then the LPFP will be heard and it fires up.
Turn the key - turns over - gauges look normal - not LPFP - then the pump kicks in after about 15 seconds. and it fires.
I have changed:-
Ignition Switch for a brand new Genuine one
Fuse Board under the bonnet
Fuse board under the steering wheel
Cant remember if I changed the CCU.
I have added additional earths from the ECU to the Battery -ve terminal.
Inspected the Ignition switch loom to wiring harness / fuseboard.
Replaced GlowPlugs.
no error codes - except low pressure - which I expect as the fuel pump isnt running straight away.
I have NOT changed the immobiliser box behind the clocks, nor have I changed the pickup coil around the ingintion switch.
Has anyone else had this issue.
ironically.... if its damp / cold weather - it starts up straight away.
All Live Data for HPF Rail and LPFP looks good.
Today saw a new fault where any fob didn't really want to unlock the car - so I'm going to swap the CCU this week.
any takers????