A

a62vw

Member

• Jun 23, 2010

• #1

Hi all,

I'm planning to fit a VDO oil pressure gauge (amongst others) to my Defender TD5 but don't know whether to go for 0-5 bar or 0-10 bar range. What's the normal oil pressure range for the TD5 engine, please? If it's never normally over 5 bar (about 75 psi) then it's the low range one for me!

Also, what size threads do I need for the T piece?

Cheers!

Vaughn.

 

Last edited: Jun 23, 2010

S

ssmn1234

Active Member

• Jun 23, 2010

• #2

Reliefe valve cracks at 4 bar, so the 0 - 5 bar would be plenty.

 

A

a62vw

Member

• Jun 23, 2010

• #3

Cheers for that!

Any ideas on the thread sizing? VDO do a variety of T pieces but they don't seem to have a listing for Land Rover!

 

A

a62vw

Member

• Jan 13, 2012

• #4

Hi,
It's been a while since I posted this one but can anyone tell me what thread is needed for the T piece?
Thanks,
Vaughn.

 

A

a62vw

Member

• Mar 29, 2012

• #5

Any ideas? Someone...

 

Shifty1962

Well-Known Member

• Mar 30, 2012

• #6

Think it may be an NPT tapered thread but no idea what size. Pretty sure its not metric.

 

sierrafery

Well-Known Member

• Mar 31, 2012

• #7

The 5 bar gauge will do it:
Pressure at idle (Cold) 3.0 bar (43.5 lbf.in 2 )
Pressure at 3500 rev/min (Hot) 1.5-3.0 bar (21.75-43.5 lbf.in 2 )

i dunno about the thread aswell but seeing this pic Defender TD5 Oil Pressure Switch Genuine Land Rover NUC000020 it seems to me that Shifty is right... ask at a store or scrapyard to see one and have a callipers on you then