cornish rattler

cornish rattler

Well-Known Member
Ok i haven't looked if it just thought about it now but if i strengthened the frame of a new back door ( mines bent at the bottom after son went off roading and caught the spare wheel going down a steep slope ) and the bottom of the frame is rotten aswell and use the whole frame of the door will it be ok, i know the spare will sit higher fitted on the inside of the door and will reduce the room in the back a bit but not too bothered about that.

What do you think :)
 
Discokids said:
Bonnet!
Click to expand...

Nar don't fancy it on the bonnet but had a quick look yesterday and think it will just go but i will remove the spare and have a look with the spare in the back against the back door when its closed, the only thing i can see atm is the spare on the outside of the door is off set to keep it away from the door handle and it sits slightly lower on the outside to so i will take that into consideration when seeing if it will go :)
 
You may also find that as it will stick out a bit into the rear, it will probably catch or even get in the way of opening or shutting the door!
 
There are carriers to fit inside the back. They fit where the seats go in a s/w and the top bolts to the roof mountings. Looks really neat
 
R1nut said:
There are carriers to fit inside the back. They fit where the seats go in a s/w and the top bolts to the roof mountings. Looks really neat
Click to expand...
Do you have a link for the folks that supply these... I remember seeing a picture, but cannot find one?
 
I know its difficult at your age but try googling (defender internal wheel carrier image)
 
MaxyMan said:
Just fit a carrier to the back mate take all the weight off the back door.
Click to expand...

The spare will still get caught though as from my original post, normally going down a steep slope ( off road ) the landy would either get caught on the fixed tow bar or the tow bar would dig the slope away which would help the spare not to get caught on the slope but when we replaced the chassis we fitted a removable tow bar type bracket so now the spare has no protection when going down slopes when off roading so fitting the spare on the inside of the door would be ideal if it could be done :)
 
I can see it being a pain in rear being on the inside of the door personally I think better off mounting it against the back bulkhead like they do on truck cabs.
ive had mine on some fair slopes and not had any issues, if it does touch then it won't be damaging the back door as all the weight is taken by the chassis so will just be the rubber ploughing! :p I havnt got anywhere inside to store a 37" and be able to lift it in & out easily!

And it does go down some steep drops with no issues!





 
Last edited:
2016-06-29-16-40-32--435281363.jpg
Mount it like a wolf
 
You must log in or register to reply here.

Similar threads

ChrisBduck
3.6L Land rover 90
Replies
2
Views
839
ChrisBduck
ChrisBduck
Rubberknees
P38 rear door window trims replacement
Replies
14
Views
1K
Rubberknees
Rubberknees
F
Freelander 2 (LR2) Drivers door bent back the wrong way
Replies
9
Views
1K
Nodge68
Nodge68
J
300 Tdi Engine back in, nearly - Story and at the end Questions
Replies
0
Views
717
jer_300Tdi_90
J
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S