R

robert0107

Member

• Jan 22, 2014

• #1

I have a 2001 P38 diesel 2.5 and I want to fit some DRL's to the front of it but don't know the best place to get an ignition controlled feed so that when I start the car the DRL's illuminate.
Thanks

 

Datatek

Well-Known Member

• Jan 22, 2014

• #2

robert0107 said:

I have a 2001 P38 diesel 2.5 and I want to fit some DRL's to the front of it but don't know the best place to get an ignition controlled feed so that when I start the car the DRL's illuminate.
Thanks

Click to expand...

There is a setting in the BECM for daytime running lights.

 

R

robert0107

Member

• Jan 23, 2014

• #3

Sorry but I am a novice where the P38 is could you please expand further as I don't know where the BECM is or where on it to look.
Thanks

 

2.0_hippo

Well-Known Member

• Jan 23, 2014

• #4

robert0107 said:

Sorry but I am a novice where the P38 is could you please expand further as I don't know where the BECM is or where on it to look.
Thanks

Click to expand...

will need to be programmed by a garage or someone with the correct diagnostics equipment.


although once programmed it usually puts the front and rear sidelights on during the day.

id just want the front ones on.

 

R

robert0107

Member

• Jan 23, 2014

• #5

Thanks for that, we have a Landy garage local to us (Landrover World) so I will pop down and see them although I was hoping to save money by doing it myself.

Rob

 

K

kds

Well-Known Member

• Jan 24, 2014

• #6

What about using a voltage sensing relay as used on the 12S towing socket, only need a fused live off the battery to lights.

 

Pikey

Dummy Ejection Facilitator..

• Jan 24, 2014

• #7

Standard relay fed from the alternator's rev counter feed. will do the job fine and will only put lights on when engine is running.

 

Rollo Tomasi

Active Member

• Jan 24, 2014

• #8

Datatek said:

There is a setting in the BECM for daytime running lights.

Click to expand...

I tried that setting on mine using me Nanocom, it made no difference weather selected or not I had no DRL's.
I do recall reading something in Rave about it only being used for certain markets, maybe that's why.

Edit. Just found it, copied from Rave.

Daytime Running lamps
This feature is a requirement for vehicles for the Canadian,
Norwegian, Swedish and Finnish markets.
On these vehicles, with the engine running, daytime
running loads will be active regardless of the state of
any switches.
This feature will in no way effect the operation of any
of the other lighting systems.

Maybe it's just for selected markets & by default it's turned off in the UK.
Now would a locked BECM allow you to change this, or would it need to be unlocked, I know mines locked.

 

Last edited: Jan 24, 2014

albany

Member

• Jan 29, 2014

• #9

Had a play with that setting a few weeks back using a Nanocom Evolution on my UK, 2001 car.

Choice of No DRL, Sidelights, or dipped headlights.

UK market was no DRL by default I believe. Sidelight setting will not stick (suspect it is because mine is set as a UK car and I believe sidelight DRLs were not legal back in the day).

Headlight setting will stick though if you want it.

Tail lights come on as well. So might as well just turn the switch yourself!

My BECM is locked.