Boris113

Well-Known Member

• Jan 19, 2011

• #1

Hi guys, I'm doing some work to an ex-mod land rover 90 FFR for a family friend, he wants chequer plate fitting to the wings but they still have small boxes about 6x6" and an inch tall on each wing. I dont have the landy here to check but how are these boxes attached?

This link should show a 110 with the same style boxes.
http://www.ukemergency.co.uk/police/dscd0121.jpg

Thanks, Harry

 

sypher

Well-Known Member

• Jan 19, 2011

• #2

normally bolted up through the wing tops ( if he dont want them can I have first dibs )

 

lr110

Well-Known Member

• Jan 19, 2011

• #3

dont do it!!!!!! tell him to buy a civvy one if he wants to put checker plate on it

 

bigcarorguk

Member

• Jan 19, 2011

• #4

Is there a template anywhere for the wing tops? So I can have my local fabricator cut some?

 

wiltshire landyman

I’m back

• Jan 19, 2011

• #5

bigcarorguk said:

Is there a template anywhere for the wing tops? So I can have my local fabricator cut some?

Click to expand...

make one:doh:

 

Badger

Well-Known Member

• Jan 20, 2011

• #6

use some 9mm plywood to mark out the basic shape of the wing tops, then cut to exact shape using a circular saw & jigsaw.

Should take you an hour or so and drop it off to the fabricators, at least you'll know the shape and measurements are exact.

 

Boris113

Well-Known Member

• Jan 21, 2011

• #7

I did tell the bloke it was a shame to fit chequer plate but he wants it doing

Sypher I will ask him and if he doesn't want them then thats not a problem.

Are the boxes for radio ariels or something else?

Harry

 

lr110

Well-Known Member

• Jan 21, 2011

• #8

they are for the ariels look at the emlra website for pictures