stefan063

New Member
Hi guys,

I have one problem that is related to fitting aditional amp and sub-woofer!
I have instaled all,connected amp signal to input signal that goes from navi to amp,and amp and woofer are working...Only thing is that I cannot control volume of the sub-woofer of volume knob on navi wich we all use to lower or push the volume to the limit :D

Is it possible that there goes the fixed sound signal and is not possible to control volume of the woofer???

Regards
 
So you can't turn the volume of the woofer down ? The volume doesn't go up and down with the rest of the speakers ?
 
sounds like you have spurred off the wrong cable.

have you connected onto a speaker output and then fed that into the high level input of your subs amp ?
 
sounds like you have spurred off the wrong cable.

have you connected onto a speaker output and then fed that into the high level input of your subs amp ?

You think that I have to connect amp with woofer not input signal that is located on RR amp?
 
You think that I have to connect amp with woofer not input signal that is located on RR amp?


in english ??? lol

i fitted an amp and sub to mine but i fed a phono feed from the headunit as i have an aftermarket headunit with a subwoofer out.


but to be able to get the volume control to work i think you need to splice off one of your speaker outputs and connect it into the high level input on your amp (if it has one)

take a pic of your setup and amp so we have a better idea.


heres mine :)


IMG_0664.jpg




changed the speakers to aftermarket jobbys :D much better :p

IMG_0010.jpg
 
Last edited:
THX 2.0_hippo ... I have something different in mind... I have done different! :) I will post my pics tomorrow and you will see what I had in mind!? Thanks once again!!!
 

Similar threads